[Assam] INDIA @60 - NORTH EAST INDIA INVESTMENT CONFERENCE

Fri Aug 31 02:55:31 PDT 2007

Somebody should ask the inviters to add to 'mere Invitation to participate"
---A PartialList of Encouraged Investments in NE:____________________________-__________________________-------

The Encouraged Industries for Foreign Investment 

I. Agriculture, Forestry, Animal Husbandry and Fishery1. Improvement of low and medium yielding field.2. Innocuous planting technology and serialization development and production of vegetables (including edible mushrooms and melons), fruits and tea.3. Development and production of new varieties with good-quality and high-yielding crops, such as sugar-yielding crops, fruit trees, flowers and grass and related new techniques (not including genetic-transfer breeds).4. Construction and operation of flower production and bases for plant nurseries.5. Comprehensive utilization and returning to fields of straws and haulms of agricultural crops, and development and production of organic fertilizers resources.6. Planting and breeding of traditional Chinese medicines (joint-ventures and cooperative ventures only).7. Afforestation of trees (bamboo) and breeding of fine strains.8. Planting of natural Rubber plants, sisals and coffee trees.9. Breeding of good strains of domestic animals, fowls and aquatic fingerlings (not including special, precious and good strains of our country).10. Breeding of famous, special and fine aquatic products and deepwater net and case breeding.11. Construction and operation of ecology and environmental protection engineering such as tree and grass planting to prevent expansion of desert and wasteland and soil erosion.
II. Excavation Industry1. Venture prospecting and exploitation of petroleum and natural gas. (*)2. Exploitation of low infiltration petroleum and natural gas reserves and fields. (*)3. Research, development and application of new technologies for increasing the efficiency of exploitation and collection of crude oil. (*)4. Development and application of new techniques for petroleum exploitation and development, such as material prospect, well drilling, well measuring, and under-well task. (*)5. Exploitation and development of coal and associated resources.6. Prospecting and exploitation of coal bed gas.7. Exploitation and ore dressing of low quality and difficult dressed metallurgical mines (joint ventures and cooperative ventures only, sole foreign owned ventures permitted in western regions).8. Prospecting, exploitation and dressing of iron and manganese ore.9. Prospecting and exploitation of copper, lead and zinc ore (joint ventures and cooperative ventures only, sole foreign owned ventures permitted in western regions).10. Prospecting and exploitation of aluminium ore (joint ventures and cooperative ventures only, sole foreign owned ventures permitted in western regions).11. Exploitation and dressing of chemical ores, such as sulphur, phosphor, and kalium.
III. Manufacturing Industries(I). Food Processing Industry 1. Storing and processing of grains, vegetables, fruits, and poultry and domestic animal products.2. Processing of aquatic products, cleaning and processing of shellfishes and nutritious food development with seaweeds.3. Development and production of vegetable and fruit drinks, protein drinks, tea drinks and coffee drinks.4. Development and production of foods for infants, the elderly, and nutritious foodstuff.5. Production of dairy products.6. Development and production of bio-feed and protein feed.
(II). Tobacco Processing Industry1. Production of diacetate for cigarette making and processing of tows.2. Production of tobacco flake by techniques of paper making.
(III). Textile Industry1. Production of special textiles for engineering purpose.2. Weaving, dyeing and post processing of top grade fabrics.
(IV). Leather and Fur Products Industry1. Processing of blue wet skin of pigs, cattle and sheep with new techniques.2. Post ornament and processing of leather with new techniques.
(V). Wood Processing and Bamboo, Rattan, Palm, Grass Products IndustryDevelopment and production of new products by comprehensive utilization of "sub-quality, small and firewood" lumber and bamboo in the forest areas and relevant technologies.
(VI). Paper Making and Paper Products Industry1. Construction and operation these projects: production of chemical wood pulp with an annual capacity of 300,000 tons and above, production of chemical mechanical wood pulp with an annual capacity of 100,000 tons and above (CTMP, BCTMP, APMP), and engineering of combination of forest, wood and pulp in raw material forest base (joit ventures and cooperative ventures only).2. Production of top grade paper and paper board (not including newsprint).
(VII). Petroleum Processing and Coking Industry1. Deep processing of needle coke and coal tar.2. Production of hard coke and dry coke quenching.3. Production of heavy-duty transportation highway asphaltum.
(VIII). Manufacturing Industry of Chemical Raw Materials and Chemical Products1. Production of alkene by catalyzing and cracking heavy oil.2. Production of ethylene with an annual capacity of 600,000 tons and above (The Chinese party shall be a comparative holding party).3. Comprehensive utilization of ethylene side-products such as C5-C9.4. Large-scale production of PVC resin (ethylene method).5. Production of serial organic chlorine chemical products (not including high remnant organic chlorine products).6. Comprehensive utilization of basic organic chemical raw materials: the derivatives of benzene, methylbenzene and (para-, ortho- and meta) dimethylbenzene.7. Production of supporting raw materials for synthesized materials (bisphenol-A, 4.4' diphenylmethane, diiso-cyan ester, and vulcabond toluene prussic acid ester).8. Synthetic fiber raw materials: precision terephthalic acid, vinyl cyanide, caprolactam and nylon 66 salt.9. Synthetic rubber (liquid butadiene styrene rubber by butadiene method, butyl rubber, isoamyl rubber, ethyl rubber, butadiene rubber, acrylic rubber, chlorophyrin rubber.10. Production of engineering plastic and plastic alloys.11. Fine chemistry: New products and technology for catalytic agent, auxiliary, and pigment; processing technology for the commercialization of dye (pigment); electronics and high-tech chemicals for paper-making, food additives, feed additives, leather chemical products, oil-well auxiliaries, surface active agent, water treatment agent, adhesives, inorganic fiber, inorganic powder stuffing and equipment.12. Production of auxiliary, assistant grease, dyestuff textile and chemical fibre threading.13. Production of automobile exhaust purificant, catalyzer, and other assistants.14. Production of natural spices, synthetic spices and single ion spices.15. Production of high performance coating materials.16. Production of Chloridized titanium dioxide.17. Production of substitute of fluorin-chlorine-kene.18. Large-scale production of chemical products using coal as raw material.19. Development and production of new products of forest chemical products and relevant techniques.20. Manufacturing of Ion film for caustic soda.21. Production of bio-fertilizers, high-density fertilizers (potash fertilizer, phosphate fertilizer), and composite fertilizers.22. Development and manufacturing of new varieties of high efficiency, low poison and low remnant chemical pesticides and material medicines.23. Development and production of bio-pesticides.24. Development and manufacturing of non-organic, organic and biological films for environmental protection purpose.25. Comprehensive utilization, treatment and disposition of exhaust gas, disposed liquid and waste residue.
(IX). Pharmaceutical Industry1. Manufacturing of pharmaceutical raw materials that are under our country's own patent or administrative protection, and chemical pharmaceutical raw materials needed importation.2. Production of vitamins: niacin.3. Amino acid: serine, tryptophan, histidine, etc.4. Analgesic-antipyretic which has to be produced through new technical equipment.5. New type of anti-carcinogen and cardio-vascular and cerebrovascular medicines.6. New, effective and economical contraceptive medicines and devices.7. New medicines produced by means of biological engineering technology.8. Vaccines Production by genetic engineering method: Vaccines against AIDS, type-C hepatitis and contraceptive vaccines, etc.9. Development and production of marine medicines.10. Production of diagnosis reagent for AIDS, and radio-immunity diseases.11. Medicines and pharmaceutics: new products and new forms of drugs produced by means of slow release, control release, target preparation and those absorbed through skins.12. Development and utilization of new type of pharmaceutical adjuvant.13. Processing and production of Chinese traditional herbal medicines, extracts from Chinese traditional herbal medicines, Chinese patent drugs (with the exception of preparing technique of traditional Chinese herb medicine in small pieces ready for decoction).14. Production of biomedicines and materials and relevant products.15. Production of antibiotic material medicines for animals (including antibiotics and chemical synthesis).16. Development and manufacturing of new products or new forms of antibiotics, anthelmintic, insecticide, and anti-coccidiosis medicines used for animals.
(X). Chemical Fibre Manufacturing Industry1. Production of new and high technological differential chemical fibers such as aromatic synthetic fiber, carbon fiber, etc.2. Manufacturing of environmental protection type viscose staple non-toxic weaving fiber chemical fibers.3. Production of polyester for fabrics and non-fabrics with a daily capacity of 400 tons and above.
(XI). Plastic Products Industry1. Production of polyamide film.2. New technologies for the production of agricultural films, and development of new products (photolysis film, multi-functional film and raw materials).3. Clearing up and recycling of waste plastics.
(XII). Nonmetal Minerals Products Industry1. Production line of fine-quality floating glass with a daily melting capacity of 500 tons or over (restricted to the middle and western regions only).2. Production line of new type of dry process cement of clinker with a daily output capacity of 2,000 tons or more (only in the mid-west region of this country.)3. Production line of glass fiber (through direct melting process) and glass fiber reinforced plastic with an annual capacity of 10,000 tons or more.4. Production line of top grade sanitation porcelain with an annual production of 500,000 pieces.5. Standardization of refinery of porcelain materials, and production of top quality ornament materials for porcelain.6. Production of high-class refractory material used in furnaces for glass, ceramics and glass fiber.7. Manufacture of non-organic, non-metal materials and products (artificial crystal, high performance synthetic materials, special glass, special ceramics, special hermetical materials and special glue curdling materials).8. Production of new building materials (light, strong and multifunctional materials for wall, top grade and environmental protection type decorating and finishing materials, fine quality waterproof materials and highly efficient thermal insulation materials).9. Deep processing of nonmetal ores (super fine comminution, high purity, refinery and change of performance).
(XIII). Ferrous metallurgical processing, Smelting and Mangling Industry1. Wide and thick plate production.2. Manufacture of galvanized and high causticity resistance aluminium-zinc alloy plate, and coated plate.3. Production of direct reducted iron and retailored iron.4. Processing and treatment of steel scrap.
(XIV). Non-ferrous Metallurgical Processing, Smelting and Mangling industry1. Production of alumina with an annual capacity of 300,000 tons and over.2. Smelting of low quality and difficult dressed metallurgical ores (joint ventures and cooperative ventures only, sole foreign owned ventures permitted in western regions).3. Production of hard alloy, tin compound, and antimony compound.4. Production of non-ferrous composite materials, new type of alloy compounds.5. Rare-earth application.
(XV). Metal Products Industry1. Design and manufacture of mould for nonmetal products.2. Manufacture of car and motorcycle moulds (including strike moulds, plastic filling moulds, mould-pressing moulds, etc) and clippers (welding clipper, testing clippers, etc.).3. Development and production of top grade metal products for building, water and heat supply equipment, and metal wares.
(XVI). General Mechanical Industry1. Manufacture of numerical control machine tools with coordinated movement of 3 axes and over, numerical control systems and servo equipment.2. Manufacture of high performance welding robot and effective welding and assembling production line.3. High temperature resistant insulation materials (with F, H insulation class) and mould cast insulation products.4. Development of proportional servo-hydraulic technology and production of low-power pneumatic control and stuffing static seal.5. Production of precision trimming dies, precision cavity modes and matrix standard components.6. Manufacture of precision bearings and all kinds of bearings used specially for main engines.7. Production of cast and forged semi-finished products for cars and motorcycles.
(XVII). Special Equipment Manufacturing Industry1. Development and manufacture of new technologies and equipment for storing, preserving, classification, packing, drying, transport and processing of grains, cotton, oil plants, vegetables, fruits, flowers, pastures, meat and foodstuff, and aquatic products.2. Manufacture of mechanized agricultural equipment.3. Production of new equipment for machinery and tools for agriculture and forest industries and development of relevant technology.4. Design and manufacture of engines for agricultural equipment, such as tractors and combined harvesters.5. Production of equipment for comprehensive utilization and returning to fields of straws and haulms of agricultural crops.6. Manufacture of equipment for comprehensive utilization of agricultural wastes, and wastes from sizable breeding of domestic animal fowls.7. Manufacture of new type of water-saving irrigation technical equipment.8. Manufacture of earthmovers for wet land and desilting machines.9. Development of technologies and manufacturing of equipment for environmental protection of hydrophily ecosystem.10. Manufacture of equipment for control system of long distance water allocation engineering.11. Manufacture of special machinery and equipment for flood prevention and emergency rescue .12. Manufacture of key equipment for food industries, such as high speed, asepsis filling equipment and labeling machines.13. Development of production technology and manufacture of key equipment for amino acid, enzyme preparation and food aives.14. Manufacture of integrated equipment with a feed processing capacity of 10 tons or more an hour, and the production of key spare parts.15. Manufacture of multi-color offset press for web and folio or paper of large size.16. Manufacture of new technological equipment for post ornament and processing of leather.17. Manufacture of special type industrial sewing machines with high technological content.18. Manufacture of complete set of equipment of new type of knitting machine, new type of paper (including pulp) making machines.19. Design and manufacture of new type of machines and equipment for highway and port.20. Manufacture of equipment for maintenance and self inspection and measuring for highway bridges.21. Manufacture of equipment for highway tunnels, such as operation inspection and control, ventilation, calamity prevention and rescue systems.22. Design and production of large construction and maintenance equipment for railway.23. Manufacture of new technological equipment for gardening machines and tools.24. Production of special equipment for municipal environmental sanitation.25. Manufacture of machines for road planing and repairing.26. Manufacture of tunneling machine, equipment for covered digging of city metro.27. Manufacture of 80,000 and over tons/day city sewage-disposal equipment, industrial sewage film treatment equipment, up-flow anaerobic fluidized bed equipment, and other biological sewage disposal equipment, recycling equipment for waste plastics, equipment for desulphurization and denitration equipment of industrial boiler, large high-temperature resistant, acid resistant bag dust remover.28. Manufacture of turbine compressor and combined powder machine for the complete set of equipment for an annual production of 300,000 tons and over of synthetic ammonia, 480,000 tons and over of carbamide and 450,000 tons and over of ethylene.29. Development of desulphurization technology and manufacture of relevant equipment for fire power station.30. Production of continuous casting machines for sheet metal.31. Deep processing technique and equipment of plate glass32. Manufacture of equipment for mining, loading and transporting in the well, 100 or over tons of mechanical power-driven dump trucks for mining, mobile crusher, double input and output coal grinder, 3,000 M3/h or over bucket excavator, 5M3 or larger mining loader, full-face tunneling machines.33. Design and manufacture of new instruments and equipment for petroleum exploration and development.34. Manufacture of cleaning equipment for electro-mechanical wells and production of medicines.35. Production of electronic endoscope.36. Manufacture of medical X-ray set (CT) with high frequency technology, direct digital image manipulation technology, low radiation, and a power of 80 kilowatts and over.37. Manufacture of high magnetism, super conduct type of MRI.38. Manufacture of single collection plasma treatment machines.39. Manufacture of fully automatic enzyme immunity systems (including functions for sample adding, enzyme indication, platelet washing, incubation, and data post processing, etc.)40. Development of new technologies and manufacture of new equipment for the quality control of pharmaceutical products.41. New analytical and extraction technology and equipment for the effective substance of traditional Chinese medicine.42. Wrapping materials and containers for new medicines and other advanced pharmaceutical equipment.
(XVIII). Manufacture of Transportation Equipment Industry1. Complete automobiles and complete motorcycles. (*)2. Engines of automobiles and motorcycles.3. Manufacture of key spare parts for cars: complete brakes, complete driving rods, gearbox, steering knuckle, fuel pump of diesel engine, piston (including piston ring), valve, hydraulic tappet, axle bush, booster, filter (3 filtering), even speed cardan joint, shock absorber, seat adjuster, car lock, back view mirror, glass lifter, compound meter, light, bulb, car fastener.4. Production of automobile electronic equipment systems such as: electron-control fuel-oil injecting systems, electric controlled break and locking-prevention systems, safety aerocysts and other electronic equipment.5. Production of key spare parts for motorcycles, carburetors, magnetors , starting motors, lamps, disc brakes.6. Vehicles for special purposes such as desert vehicles for petroleum industry.7. Technical equipment for railway transportation: the design and manufacture of locomotives and main parts, the design and equipment manufacture for rapid transit railway, manufacture of equipment for communicational signals and transportation safety monitoring, manufacture of electric railway equipment and instruments.8. Equipment for high speed rail transportation in cities: De sign and production of locomotive and key components for sub-way and light railway in cities.9. Design and manufacture of civil planes (the Chinese party will be the holding party).10. Manufacture of spare parts for civil planes.11. Design and manufacture of civil helicopter (the Chinese party will be the holding party).12. Design and manufacture of aeroplane engines (the Chinese party will be the holding party).13. Design and manufacture of civil air-borne equipment (the Chinese party will be the holding party).14. Manufacture of light gas turbine engine.15. Design and manufacture of crankshafts for low speed diesel engine for watercraft.16. Repair, design, and manufacture of special watercrafts, and high performance watercrafts (the Chinese party will be the comparative holding party).17. Design and manufacture of medium and high speed diesel engines, spare engines, wireless communication, navigation equipment and spare parts for watercrafts (the Chinese party will be the comparative holding party).18. Production of fibre glass fishing boat and yachts.
(XIX). Manufacture of Electric Machinery and Equipment Industry1. Fire power equipment: manufacture of 600,000 KWh and over super critical overtaking units, large gas burning turbines, and over 100,000 KWh power gas-burning and steam turbine combined cycle power equipment, coal gasification combined cyclic techniques and equipment (IGCC), pressure boost fluidized bed (PFBC), and 600,000 KWH and over large air cooling units (joint ventures and cooperative ventures only).2. Hydroelectric equipment: manufacture of large scale pump storage groups with a power of 150,000 KWH and over, and large scale tubular turbine units of 150,000 KWH and over (joint ventures and cooperative ventures only).3. Nuclear power group: manufacture of nuclear power groups of 600,000 KWh and over (joint ventures and cooperative ventures only).4. Manufacture of 500 kilovolts and over, super high voltage, direct current power transmitting and transforming equipment (joint ventures and cooperative ventures only).
(XX). Manufacture of Electronics and Communication Equipment Industry1. Digital TV, digital video camera, digital tape recorder and digital playback equipment.2. New type flat monitors and parts, medium and high resolution colour tube/display tube and glass shell.3. Digital audio and video coding and decoding equipment, digital radio and TV broadcasting studio equipment, digital cable TV system equipment, digital audio broadcasting transmitting equipment.4. Design of integrate circuits and production of Large-scale integrate circuit with a line width of 0.35 micron or a smaller line width.5. Manufacture of large and medium size computers, portable microcomputers and top grade servers.6. Development and manufacture of laser and magnetic drives with large storage capacity and parts.7. Development of 3-dimension CAD, CAT, CAM, CAE and other computer application systems.8. Development and production of software products.9. Development and production of special materials for semi-conductor and components.10. Manufacture of special electronic equipment, instruments, and industrial mould.11. New type of electronic components and parts (flake components, sensitive components and sensors, frequency control and selection components, mix integrate circuits, electric electronic components, photoelectric components, and new type of mechanical electronic components).12. Production of non-mercury alkali-manganese battery, power nickel-hydrogen battery, lithium-ion battery, high capacity complete airproof and care-free lead-acid rechargeable battery, fuel battery, column zinc air battery and high-tech green battery.13. Design and production of key components for high density digital CD drives.14. Production of CD-R, CD-RW, DVD-R and DVD-ARM.15. Design and manufacture of civil satellites (the Chinese party will be the holding party).16. Manufacture of civil satellite payload (the Chinese party will be the holding party).17. Manufacture of spare parts for civil satellites.18. Design and manufacture of civil carrier rockets (the Chinese party will be the holding party).19. Manufacture of equipment for satellite communication systems.20. Manufacture of receiving equipment and key components for satellite navigation GPS (joint ventures and cooperative ventures only).21. Production of prefabricated rod of optical fiber.22. Production of series of digital microwave synchronization transmission equipment of 622 MB/S or above.23. Production of series of phototiming transmission equipment of 10 GB/S or above.24. Manufacture of equipment for broadband cut-in communication systems.25. Manufacture of equipment for optical intercross connection (OXC).26. Production of ATM exchange boards and IP data communication systems.27. Production of equipment of mobile communication systems (including GSM、CDMA、DCS1800、PHS、DECT、IMT2000, etc.): Mobile phones, stations, exchange equipment and digital integration system.28. Development and production of high routers, network exchange boards of 1 GB/S and above.29. Manufacture equipment for air traffic control system (joint ventures and cooperative ventures only).
(XXI). Manufacture of Instruments and Meters and Cultural and Office Machinery Industry__________________-------------------------------------------
MM
Umesh SharmaWashington D.C. 1-202-215-4328 [Cell]Ed.M. - International Education PolicyHarvard Graduate School of Education,Harvard University,Class of 2005http://www.uknow.gse.harvard.edu/index.html (Edu info)http://hbswk.hbs.edu/ (Management Info)www.gse.harvard.edu/iep (where the above 2 are used )http://jaipurschool.bihu.in/ 

Yahoo! Answers - Get better answers from someone who knows. Try it now.
_________________________________________________________________
Download the latest version of Windows Live Messenger NOW!
http://get.live.com/en-ie/messenger/overview
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.assamnet.org/pipermail/assam-assamnet.org/attachments/20070831/7e3afd50/attachment.htm>